ScanSnap Setup Dialog Box
When you right-click the ScanSnap Manager icon in the notification area, and select [Scan
Button Settings] from the "Right-Click Menu" (page 41), the following ScanSnap setup dialog box
appears.
In the ScanSnap setup dialog box, you can use the [Use Quick Menu] check box to specify whether
or not to use the Quick Menu. You can also use the profile buttons and detail setting tabs to specify
scan settings according to your scanning needs.
For details, refer to the ScanSnap Manager Help.
Profile Buttons
Detail Setting Tabs
HINT
When SV600 and one of iX500, S1500, S1500M, S1300i, S1300, S1100, S510, and S300 are
connected to a computer, you can change the scan settings for each of the connected ScanSnap
models by selecting the model name from [Scanner] on the ScanSnap setup dialog box.
ScanSnap Setup Dialog Box
43
To Next Page
Loading...
