ioxadm(8)
System Administration 95
EXAMPLE 7 Show runtime of card with ESM using verbose output
EXAMPLE 8 Clear runtime of card with ESM, show runtime is cleared
EXAMPLE 9 Show card with ESM after runtime has been cleared, using verbose output
EXAMPLE 10 Display locator LED status for the External I/O Expansion Unit
If the FRU service indicator is already on due to a detected fault condition, only the
box locator LED will be set to fast.
EXAMPLE 11 Power-on the locator LED for power supply 0 in External I/O Expansion Unit
12B4
EXAMPLE 12 Enable the indicator for power supply 1 when power supply 1 has a fault in-
dication
XSCF> ioxadm -v lifetime IOU#0-PCI#1
NAC Total Time On (% of life) Warning Time Fault Time
IOU#0-PCI#1 1052370 100 1041120 1051200
XSCF>
ioxadm lifetime -z IOU#0-PCI#1
XSCF> ioxadm lifetime IOU#0-PCI#1
NAC Total Time On (% of life)
IOU#0-PCI#1 0 0
XSCF>
ioxadm -v lifetime IOU#0-PCI#1
NAC Total Time On (% of life) Warning Time Fault Time
IOU#0-PCI#1 0 0 1041120 1051200
XSCF>
ioxadm locator iox@12B4
Location Sensor Value Resolution Units
IOX@12B4 LOCATE Fast - LED
IOX@12B4/PS0 SERVICE Fast - LED
XSCF>
ioxadm locator on iox@12B4/ps0
XSCF> ioxadm locator on iox@x031/ps1
XSCF> ioxadm locator
Location Sensor Value Resolution Units
To Next Page
Loading...
