showloginlockout(8)
System Administration 423
NAME showloginlockout - display the account lockout setting
SYNOPSIS showloginlockout
showloginlockout -h
DESCRIPTION The showloginlockout(8) command displays the amount of time, in minutes,
that a user is prevented from logging in after three failed attempts.
Privileges You must have useradm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXTENDED
DESCRIPTION
A user is allowed three consecutive attempts to login. After the third failed attempt
the system prevents further attempts for the amount of time determined by the
setloginlockout(8) command. showloginlockout displays that amount of
time in minutes.
After the set amount of time has elapsed, the user may try again.
EXAMPLES
EXAMPLE 1 Display The Lockout time
EXIT STATUS The following exit values are returned:
SEE ALSO setloginlockout(8)
-h Displays usage statement. When used with other options or
operands, an error occurs.
XSCF> showloginlockout
90 minutes
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
