setsnmpusm(8)
System Administration 285
NAME setsnmpusm - specify the SNMPv3 agent’s User-based Security Model (USM)
configuration
SYNOPSIS setsnmpusm create -a authentication_protocol [-p authentication_password] [ -e
encyrption_password] user
setsnmpusm delete user
setsnmpusm clone -u clone_user user
setsnmpusm passwd [-c { auth|encrypt}] [ -o old_password] [ -n new_password]
user
setsnmpusm -h
DESCRIPTION setsnmpusm(8) modifies the SNMP Agent’s USM configuration.
Privileges You must have platadm privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
-h Displays usage statement.
When used with other options or operands, an error
occurs.
To Next Page
Loading...
