shownetwork(8)
System Administration 447
NAME shownetwork - display information of network interfaces for XSCF
SYNOPSIS shownetwork [-M] {-a | -i | interface}
shownetwork -h
DESCRIPTION shownetwork(8) command displays current information of network interfaces for
XSCF.
Information on the specified network interface or all the network interfaces can be
displayed. The following information is displayed:
Privileges You must have one of the following privileges to run this command:
useradm, platadm, platop, auditadm, auditop, domainadm, domainmgr,
domainop, fieldeng
Refer to setprivileges(8) for more information.
OPTIONS The following options are supported:
xscf#x-y XSCF network interface name
HWaddr MAC address (hexadecimal notation)
inet addr IP address
Bcast Broadcast
Mask Netmask
UP/DOWN Whether the network interface is enabled
-a Displays information for all XSCF network interfaces.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-M Displays text by page. This option provides a function that is the
same as that of the more command.
To Next Page
Loading...
