showlookup(8)
System Administration 441
NAME showlookup - display the configuration for authentication and privileges lookup
SYNOPSIS showlookup
showlookup -h
DESCRIPTION showlookup(8) displays configuration settings for authentication and privileges.
Privileges You must have useradm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXAMPLES
EXAMPLE 1 Displaying Settings for Authentication and Privileges
EXIT STATUS The following exit values are returned:
SEE ALSO setlookup(8)
-h Displays usage statement.
XSCF> showlookup
Privileges lookup:Local only
Authentication lookup: Local and LDAP
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
