showsnmpusm(8)
System Administration 479
NAME showsnmpusm - display the current User-based Security Model (USM) information
for the SNMP agent
SYNOPSIS showsnmpusm
showsnmpusm -h
DESCRIPTION showsnmpusm(8) displays the current USM information for the SNMP agent.
Privileges You must have platadm or platop privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXAMPLES
EXAMPLE 1 Displaying SNMP Information for a System
EXIT STATUS The following exit values are returned:
SEE ALSO setsnmpusm(8)
-h Displays usage statement.
XSCF> showsnmpusm
Username Auth Protocol
-------- --------------
jsmith SHA
sue MD5
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
