setad(8)
System Administration 155
<DOMAIN> substitution marker.
EXAMPLE 15 Configures the default privileges, where privileges are the same as those used
in the setad group custom roles command.
EXIT STATUS The following exit values are returned:
SEE ALSO showad(8)
XSCF> setad dnslocatorquery -i 2
'_ldap._tcp.gc._msdcs.<DOMAIN>.<PORT:3269>'
XSCF>
setad defaultrole platadm platop
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
