Fujitsu SPARC Enterprise M3000

setdscp(8)
200 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
EXIT STATUS The following exit values are returned:
SEE ALSO showdscp(8)
Domain #11 address [10.1.1.13 ] > [Enter]
Domain #12 address [10.1.1.14 ] > [Enter]
Domain #13 address [10.1.1.15 ] > [Enter]
Domain #14 address [10.1.1.16 ] > [Enter]
Domain #15 address [10.1.1.17 ] > [Enter]
Domain #16 address [10.1.1.18 ] > [Enter]
Domain #17 address [10.1.1.19 ] > [Enter]
Domain #18 address [10.1.1.20 ] > [Enter]
Domain #19 address [10.1.1.21 ] > [Enter]
Domain #20 address [10.1.1.22 ] > [Enter]
Domain #21 address [10.1.1.23 ] > [Enter]
Domain #22 address [10.1.1.24 ] > [Enter]
Domain #23 address [10.1.1.25 ] > [Enter]
Commit these changes to the database [y|n]? y
0 Successful completion.
>0 An error occurred.