setldapssl(8)
222 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised February 2010
OPTIONS The following options are supported:
OPERANDS The following operands are supported:
-h Displays usage statement. When used with other options or
operands, an error occurs.
-i n Sets an index marker, value 1 - 5.
-n Automatically answers "n" (no) to all prompts.
-p Specifies the proxy server to be used for transfers. The default
transfer type is http, unless modified using the -t proxy_type
option. The value for proxy must be in the format
servername:port. See
EXAMPLE 12.
-q Suppresses all messages to stdout, including prompts.
-t Use with the -p option to specify proxy type as http, socks4,
or socks5. The default is http.
-u Specifies the user name when logging in to a remote ftp or http
server that requires authentication. Prompts for a password. See
EXAMPLE 13.
-y Automatically answers "y" (yes) to all prompts.
enable|disable When used with no other operands, enable or disable
LDAP/SSL.
loadcert loadcert console prompts for certificate information
to be entered at the console. Use this command to paste
certificate information copied from a file. Terminate input
with CTRL-D.
loadcert URI loads a certificate file for the LDAP/SSL
server. Supported formats for URI are:
http://server[:port]/path/file
https://server[:port]/path/file
ftp://server[:port]/path/file
file:///media/usb_msd/path/file
rmcert Delete certificate for an LDAP/SSL server. strictcertmode
must be in the disabled state for a certificate to be
removed.
To Next Page
Loading...
