setsnmpusm(8)
288 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008
EXAMPLES EXAMPLE 1 Adding a User With Password Options
EXAMPLE 2 Adding a User Without Specifying Password Options
EXAMPLE 3 Cloning a User
EXAMPLE 4 Deleting a User
EXIT STATUS The following exit values are returned:
SEE ALSO showsnmpusm(8)
XSCF> setsnmpusm create -a SHA -p xxxxxxxx -e yyyyyyyy jsmith
XSCF> setsnmpusm create -a SHA bob
Authetication Password:
Encryption Password:
XSCF>
setsnmpusm clone -u sue joe
Authentication Password:
Encryption Password:
XSCF>
setsnmpusm delete joe
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
