Fujitsu SPARC Enterprise M3000

showad(8)
System Administration 321
EXAMPLE 3 Displays specified diagnostic messages.
EXAMPLE 4 Displays configuration for administrator group 3.
EXAMPLE 5 Displays alternate server 1 setting. A port number of 0 indicates that the de-
fault port for Active Directory is used.
EXAMPLE 6 Displays the dnslocatorquery 1 configuration.
EXIT STATUS The following exit values are returned:
SEE ALSO setad(8)
valid from = Apr 18 05:38:36 2009 GMT
valid until = Apr 16 05:38:36 2019 GMT
version = 3 (0x02)
XSCF>
showad log -S 5 -E 10
Thu Sep 2 01:43 2009 (ActDir): -error- authentication status: auth-ERROR
Thu Sep 2 01:44 2009 (ActDir): -error- authentication status: auth-ERROR
Thu Sep 2 01:47 2009 (ActDir): -error- authentication status: auth-ERROR
Thu Sep 2 01:51 2009 (ActDir): -error- authentication status: auth-ERROR
Thu Sep 2 01:52 2009 (ActDir): -error- authentication status: auth-ERROR
Thu Sep 2 01:55 2009 (ActDir): -error- authentication status: auth-ERROR
XSCF>
showad group administrator -i 3
Administrator Group 3
name: CN=pSuperAdmin,OU=Groups,DC=sales,DC=company,DC=com
XSCF>
showad server -i 1
Alternate Server 1
address: (none)
port: 0
XSCF>
showad dnslocatorquery -i 1
service 1: \ _ldap._tcp.gc._msdcs.<DOMAIN>.<PORT:3269>
0 Successful completion.
>0 An error occurred.