showdevices(8)
372 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised November 2009
EXIT STATUS The following exit values are returned:
SEE ALSO addboard(8), deleteboard(8), moveboard(8), setdcl(8), setdscp(8),
setupfru(8), showboards(8), showdcl(8), showfru(8)
00 00-0 sd3 /dev/dsk/c0t3s0s1 dump device (swap)
00 00-0 sd3 /dev/dsk/c0t3s0s1 swap area
00 00-0 sd3 /dev/dsk/c0t3d0s3 mounted filesystem "/var"
00 00-0 sd3 /var/run mounted filesystem "/var/run"
00 00-0 sd4
00 00-0 sd5
00 00-0 sd6
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
