showdscp(8)
380 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2008
OPTIONS The following options are supported:
EXAMPLES
Caution – The IP addresses shown in the following examples are examples only.
EXAMPLE 1 Displaying a Table of All DSCP IP Addresses
-d domain_id Displays an individual domain’s IP address.
-h Displays usage statement.
When used with other options or operands, an error occurs.
-p Generates parsable output.
-s Displays the Service Processor’s IP address.
-v Specifies verbose output. Prints additional information about
internal progress of the program’s operations to the screen.
XSCF> showdscp
DSCP Configuration
Network: 10.1.1.0
Netmask: 255.255.255.0
Location Address
---------- ---------
XSCF 10.1.1.1
Domain #00 10.1.1.2
Domain #01 10.1.1.3
Domain #02 10.1.1.4
Domain #03 10.1.1.5
Domain #04 10.1.1.6
Domain #05 10.1.1.7
Domain #06 10.1.1.8
Domain #07 10.1.1.9
Domain #08 10.1.1.10
Domain #09 10.1.1.11
Domain #10 10.1.1.12
To Next Page
Loading...
