Fujitsu SPARC Enterprise M3000

showldapssl(8)
System Administration 417
EXAMPLE 3 Displays specified diagnostic messages.
EXAMPLE 4 Displays configuration for administrator group 3.
EXAMPLE 5 Displays alternate server 1 setting. A port number of 0 indicates that the de-
fault port for LDAP/SSL is used.
EXAMPLE 6 Displays the optional user mapping settings.
EXIT STATUS The following exit values are returned:
SEE ALSO setldapssl(8)
valid from = Apr 18 05:38:36 2009 GMT
valid until = Apr 16 05:38:36 2019 GMT
version = 3 (0x02)
XSCF>
showldapssl log -S 5 -E 10
Thu Sep 2 01:43 2009 (LdapSSL): -error- authentication status: auth-ERROR
Thu Sep 2 01:44 2009 (LdapSSL): -error- authentication status: auth-ERROR
Thu Sep 2 01:47 2009 (LdapSSL): -error- authentication status: auth-ERROR
Thu Sep 2 01:51 2009 (LdapSSL): -error- authentication status: auth-ERROR
Thu Sep 2 01:52 2009 (LdapSSL): -error- authentication status: auth-ERROR
Thu Sep 2 01:55 2009 (LdapSSL): -error- authentication status: auth-ERROR
XSCF>
showldapssl group administrator -i 3
Administrator Group 3
name: CN=pSuperAdmin,OU=Groups,DC=sales,DC=company,DC=com
XSCF>
showldapssl server -i 1
Alternate Server 1
address: (none)
port: 0
XSCF>
showldapssl usermap
attributeInfo: (&(objectclass=person)(uid=<USERNAME>))
binddn: cn=Manager,dc=company,dc=com
bindpw: Set
searchbase: ou=people,dc=company,dc=com
0 Successful completion.
>0 An error occurred.