Fujitsu SPARC Enterprise M3000

showpacketfilters(8)
460 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised April 2010
ing rules in the XSCF network.
EXIT STATUS The following exit values are returned:
SEE ALSO setpacketfilters(8)
XSCF> showpacketfilters -l
pkts bytes target prot in source
0 0 DROP all xscf#0-lan#0 172.16.0.0/255.255.0.0
0 0 DROP all xscf#0-lan#0 10.10.10.10
0 0 DROP all xscf#0-lan#1 10.10.10.10
0 0 ACCEPT all xscf#0-lan#1 192.168.100.0/255.255.255.0
0 0 DROP all xscf#0-lan#1 0.0.0.0/0.0.0.0
pkts bytes target prot in source
0 0 DROP all xscf#1-lan#0 172.16.0.0/255.255.0.0
0 0 DROP all xscf#1-lan#0 10.10.10.10
0 0 DROP all xscf#1-lan#1 10.10.10.1010
0 0 ACCEPT all xscf#1-lan#1 192.168.100.0/255.255.255.0
0 0 DROP all xscf#1-lan#1 0.0.0.0/0.0.0.0
XSCF>
0 Successful completion.
>0 An error occurred.