applynetwork(8)
System Administration 27
EXIT STATUS The following exit values are returned:
SEE ALSO rebootxscf(8), sethostname(8), setnameserver(8), setnetwork(8), setroute(8)
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the network settings.
Please confirm that the settings have been applied by executing
showhostname, shownetwork, showroute and shownameserver after rebooting
the XSCF.
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
