testsb(8)
512 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised September 2008
EXAMPLES EXAMPLE 1 Performs the initial diagnosis on PSB#00.
EXAMPLE 2 Performs an initial diagnosis of PSB#01 with detailed messages displayed.
XSCF> testsb 0
Initial diagnosis is about to start, Continue?[y|n] :y
SB#00 power on sequence started.
0end
Initial diagnosis started. [1800sec]
0..... 30..... 60..... 90.....120end
Initial diagnosis has completed.
SB power off sequence started. [1200sec]
0.end
SB powered off.
XSB Test Fault
---- ------- --------
00-0 Passed Normal
00-1 Passed Normal
00-2 Passed Normal
00-3 Passed Normal
XSCF>
testsb -v 1
Initial diagnosis is about to start. Continue? [y|n] :y
SB#01 powered on sequence started.
:
:
Initial diagnosis has completed.
{0} ok SB power off sequence started. [1200sec]
0.end
SB powered off.
XSB Test Fault
---- ------- --------
01-0 Passed Normal
To Next Page
Loading...
