cfgdevice(8)
System Administration 33
drive unit set on the M9000 server with the expansion cabinet.
EXAMPLE 6 Connects the CD-RW/DVD-RW drive unit and the tape drive unit to port
0-0 when the system is being powered on. Automatically answers "y" to all
prompts.
EXAMPLE 7 Connects the CD-RW/DVD-RW drive unit and the tape drive unit to port
0-0 when the system is being powered on. Automatically answers "y" to all
XSCF> cfgdevice -l
Current connection for DVD/DAT: port 0-0
Main chassis: port 0-0
Expansion chassis: port 8-0
Expander status
Port No. IOU/SAS-status SAS-status
-----------------------------------
0-0 enable up enable up
0-2 disable down enable up
0-4 disable down enable up
0-6 disable down enable up
1-0 disable down enable up
1-2 disable down enable up
1-4 disable down enable up
1-6 disable down enable up
2-0 disable down enable up
2-2 disable down enable up
2-4 disable down enable up
2-6 disable down enable up
8-0 enable up enable up
8-2 disable down enable up
8-4 disable down enable up
8-6 disable down enable up
XSCF>
cfgdevice -y -c attach -p 0-0
Are you sure you want to attach the device [y|n] :y
Completed.
To Next Page
Loading...
