fmadm(8)
68 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007
EXAMPLES EXAMPLE 1 Displaying the Fault Manager Configuration
EXIT STATUS The following exit values are returned:
SEE ALSO fmdump(8), fmstat(8)
XSCF> fmadm config
MODULE VERSION STATUS DESCRIPTION
case-close 1.0 active Case-Close Agent
fmd-self-diagnosis 1.0 active Fault Manager Self-Diagnosis
sysevent-transport 1.0 active SysEvent Transport Agent
syslog-msgs 1.0 active Syslog Messaging Agent
0 Successful completion.
>0 An error occurred.
To Next Page
Loading...
