To Next Page
D
danavillarrealSep 4, 2025
What to do if Keyboard controller error occurs on Fujitsu STYLISTIC Q584 Tablet?
- DdanahudsonSep 4, 2025
Switch your Fujitsu Tablet PC off with the ON/OFF button. Wait 3 - 5 seconds and switch the Tablet PC on again.
What to do if Keyboard controller error occurs on Fujitsu STYLISTIC Q584 Tablet?
Switch your Fujitsu Tablet PC off with the ON/OFF button. Wait 3 - 5 seconds and switch the Tablet PC on again.
What to do if User and/or supervisor SmartCard lost on Fujitsu STYLISTIC Q584?
If you have lost your user SmartCard, you can continue working with the supervisor SmartCard and initialize a new user SmartCard or deactivate the SystemLock function. If you have lost the supervisor SmartCard, you can also continue working, but you no longer have all rights and cannot initialize another supervisor SmartCard. If you have lost both SmartCards, you cannot boot your system. Please contact our customer service center. You must provide proof of ownership for the device. The customer service center will then refer you to our service partner, who will unlock your device (for a charge).
What to do if SmartCard PIN forgotten on Fujitsu STYLISTIC Q584 Tablet?
If you work in a network, contact your system administrator, who can unlock your Fujitsu Tablet PC using a supervisor PIN.
What to do if SmartCard reader is not recognized on Fujitsu STYLISTIC Q584?
Make sure you have inserted your SmartCard into the SmartCard reader with the chip facing upwards. Check whether the SmartCard you are using is supported. Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4.
Why is the stylus input not working on my Fujitsu STYLISTIC Q584 Tablet?
If stylus input is not working on your Fujitsu Tablet, install the driver for the standard model if your device can only be operated using the stylus. If your device can be operated using the stylus and by finger, install the driver for the "Dual Digitizer" model.
Why does the cursor not correctly follow the stylus movements on my Fujitsu STYLISTIC Q584 Tablet?
If the cursor does not correctly follow the stylus movements on your Fujitsu Tablet, calibrate the stylus as described in chapters "Adjusting the stylus", Page 32 and "Calibrating the stylus", Page 32.
Why does the wireless connection to a network not work on my Fujitsu Tablet?
If the wireless connection to a network does not work on your Fujitsu Tablet, ensure the wireless component is switched on. Check whether the wireless connection is enabled by the software. Further information on using the wireless component can be found in the help files.
How to correct the date or time on my Fujitsu STYLISTIC Q584 Tablet PC?
To correct the date or time on your Fujitsu Tablet PC, use the BIOS-Setup-Utility to set the date and time in the Main menu. Alternatively, contact your sales outlet or our hotline/service desk.
Why does the printer not print from my Fujitsu Tablet?
If the printer does not print from your Fujitsu Tablet, ensure the printer is switched on and ready. Check that the data cable between the Tablet PC and the printer is properly connected. Verify that the correct printer driver is loaded.
Why is the external monitor blank or the image unstable when connected to my Fujitsu STYLISTIC Q584 Tablet?
If the external monitor is blank or the image is unstable when connected to your Fujitsu Tablet, terminate the application program in Windows. If the error persists, use the key combination for switching the screen output to switch to the touchscreen of the Tablet PC. Change the screen resolution and select the appropriate monitor in your operating system's settings.
General