What to do if my Fujitsu Tablet PC’s touchscreen remains dark?
If your Fujitsu Tablet PC’s touchscreen remains dark, try pressing a key on an external keyboard or tapping the touchscreen. Also, check whether the graphics driver settings are correct or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile", especially if you have an external monitor or television set connected.
What to do if the display on my Fujitsu STYLISTIC Q584 Tablet’s touchscreen is difficult to read?
If the display on your Fujitsu Tablet PC's touchscreen is difficult to read, try moving the Tablet PC into a different position to avoid reflected glare. You can also increase the screen brightness.
Why does the external monitor remain blank when connected to my Fujitsu STYLISTIC Q584 PC?
If the external monitor remains blank when connected to your Fujitsu Tablet PC, first ensure the monitor is switched on. If power saving is activated, press a key or tap the touchscreen. Adjust the brightness of the monitor. Check the graphics driver settings or whether an external monitor has been detected in "Intel Graphics Media Accelerator Driver for mobile". Also, ensure the AC and data cables are properly connected, then switch on the external monitor and the Tablet PC.
What to do if the wireless connection to a network does not work on Fujitsu STYLISTIC Q584?
If the wireless connection isn't working, first ensure the wireless component is switched on. If it is on but the connection still fails, check whether the wireless connection is enabled by the software. Further information on using the wireless component can be found in the help files.
What to do if the battery indicator does not illuminate on Fujitsu STYLISTIC Q584 Tablet?
If the battery indicator does not illuminate, it likely means the battery is discharged. Charge the battery or connect the Tablet PC to a power outlet using the AC adapter.
Why does the battery discharge too quickly on my Fujitsu STYLISTIC Q584?
Several factors can cause the battery on your Fujitsu Tablet to discharge quickly. The battery might be too hot or too cold; in this case, bring the Tablet PC to a normal operating temperature. If the operating time is extremely short, the battery may be too old, and you should replace it if necessary. An application running may be consuming a lot of power due to frequent access of the hard disk or optical drive, so use the AC adapter whenever possible. Finally, the screen brightness may be set too high, so reduce the brightness to lower energy consumption via Control Panel – Hardware and Sounds – Windows Mobility Center.
Why is the battery on my Fujitsu Tablet discharging too quickly?
If the battery on your Fujitsu Tablet discharges too quickly, it may be too hot or too cold; bring it to a normal operating temperature. If the operating time is extremely short, the battery is probably too old and may need replacing. Use the AC adapter whenever possible. Also, reduce the screen brightness via Control Panel – Hardware and Sounds – Windows Mobility Center.
Why is the battery indicator not illuminating on my Fujitsu STYLISTIC Q584 Tablet?
If the battery indicator doesn't light up on your Fujitsu Tablet, the battery may be discharged. Try charging the battery. You can also connect the Tablet PC to a power outlet using the AC adapter.
What to do if my Fujitsu Tablet PC does not start after switch on?
If your Fujitsu Tablet PC doesn't start, try these steps: First, charge the battery. If that doesn't work, connect the AC adapter to the Tablet PC. Also, ensure the AC adapter is properly connected to the Tablet PC. Finally, try switching the Tablet PC on.
What to do if my Fujitsu STYLISTIC Q584 Tablet PC does not start after switching it on?
If your Fujitsu Tablet PC does not start, ensure that the AC adapter is properly connected to the Tablet PC. Also, check if the battery is discharged and charge it if necessary. Then switch the Tablet PC on.
To Next Page
General