FULTON VSRT-60 - 5.2.3.1 Setting Steam Pressure Controls; 5.2.3.2 Testing Steam Pressure Controls

COMMISSIONING - 4
Fulton Ltd
Table7- Steam Program for Siemens LMV3*
Par.No.
Parameter
Min Value
Max Value
Fulton Setting
Customer
936
Standardized speed
-200%
200%
942
Active load source
0
255
947
Result of contact sensing(bit-coded)
0
255
950
Required relay state(bit-coded)
0
255
954
Intensity of flame
0%
100%
960
Actual flowrate
0
65525
961
Status for external modules and display
0
255
981
Error storage: Code
0
255
982
Error storage: Diagnostic code
0
255
992
Error flags
0
0xFFFFFFFF
*Data is for reference purposes only. Fulton Companies is not responsible for this product, including (but not limited to) its accuracy, reliability, and safety. No
Fulton document should substitute for full review of documentation available from the product manufacturer.
+Out of Test Fire
Note: Customer settings should be recorded in the Customer column for reference.
VSRT-IOMM-2019-1
Page 42