EasyManua.ls Logo

FULTON VSRT-60 - Regulations

FULTON VSRT-60
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page VII
VSRT-IOMM-2019-1
SAFETY PRECAUTIONS
Fulton Ltd
III REGULATIONS
Observe the following when working on this system:
Work on gas equipment must only be carried out by a qualified gas engineer.
Work on electrical equipment must only be carried out by a qualified electrician.
All legal instructions regarding the prevention of accidents,
All legal instructions regarding environmental protection,
The Code of Practice of relevant trade associations,
All current safety regulations as defined by PED, DIN, EN, DVGW, TRGI, TRF, VDE and all locally applicable
standards,
Gas Safety (Installation & Use) Regulations
-
The appropriate Building Regulation either the Building regulations, the Building Regulation (Scotland) or
Building Regulations (Northern Ireland).
-
The Water Fittings Regulation or Water Bylaws in Scotland,
-
The current I.E.T. Wiring Regulations.
The Pressure System Safety Regulations 2000
Fulton boilers fall within the scope of the Pressure Systems Examination Scheme.
Regular inspections are therefore required by a competent person.
The scope of the examination and the actual intervals between examinations is at the discretion of the competent
person.
It is the responsibility of the user to provide a written scheme of examination for those parts of the system in which
a defect may give rise to danger.
Instructions in this manual are provided for the safe operation and maintenance of the boiler and do not cover
periodic statutory inspections.
For further information contact:
(a)
SAFed
SAFETY ASSESSMENT FEDERATION Limited.
Nutmeg House,
60 Gainsford Street,
Butlers Wharf,
London, SE1 2NY.
(b)
Health and Safety Executive local office.
(c)
Your Competent Person.

Table of Contents

Other manuals for FULTON VSRT-60

Related product manuals