Furuno FA - Marks and Lines

5. VIDEO PLOTTER OPERATION
5-16
[MARK MENU]
1 ORIGIN MARK STAB
GND/SEA
2 MARK KIND
ORIGIN MARK(No.)/
ORIGIN MARK(SYM)/
MAP MARK/
WP 1~50/
WP 51~100/
WP 101~150/
WP 151~198/
OWN SHIP SHAPE
9 MAP DISPLAY
OFF/ON
0 MAP MARK COLOR*
RED/GRN/BLU/YEL
CYA/MAG/WHT
5.10 Marks and Lines
You can inscribe marks on the display to denote important points, for example, a
buoy or a wreck. The memory for marks, lines and own ship’s track is 6,000
points.
5.10.1 Inscribing marks and lines
1. Roll the trackball to choose the MARK box at the left side of the screen.
MARK > 
Mark type
-> +
162
°
T11
Mark box
2. Push the right button to open the MARK menu.
MARK menu
3. Roll the wheel to choose 2 MARK KIND and then push the wheel or the left
button.
4. Roll the wheel to choose MAP MARK and then push the wheel or the left
button.
Note: For non-IMO type radars you may specify mark color by choosing 0
MAP MARK COLOR, pushing the wheel and the choosing color
desired.
5. Push the right button to close the menu. The guidance box now reads
“MARK SELECT / MARK MENU.”
*: Not available
on IMO radar.