Furuno FMD3100 - How to Attach the Hood; To Install the Optional Hood; Flush Mount; Desktop

1. MOUNTING
1-5
1.1.3 How to attach the hood (Optional)
To install the optional hood (OP24-40), do the following:
1. Referring to the figure below, fit the hood reinforcement fixture to the back of the
PCU-3000.
For flush-mounting: Install the hood fixing fixture with the flush mount brackets.
For desktop mounting: Install the hood fixing fixture with the desktop mount
brackets.
Note: The screws and washers to fix the hood fixing fixture are supplied with the
PC-3000.
2. Loosen the four knobs on the hood fixing fixture, referring to the figure below.
Flush mount Desktop
Flush mount bracket
Hood fixing fixture
Hood fixing fixture
Desktop
mount bracket
Knobs