Furuno FMD3100 - Securing Cables to the Cable Clamp

2. WIRING
2-10
2.1.6 Securing cables to the cable clamp
When installing the unit with the desktop option, use the cable clamp to secure the
electrical wiring and LAN cables.
When not using the cable clamp, drain wires must be connected to the grounding point
on the PCU-3000 (See the figure in paragraph 2.1.1).
When using the cable clamp, drain wires with crimping lugs must be connected to the
cable clamp, as shown in the figure below.
Cable clamp
DC Input
DPYC-1.5
LAN cable
FR-FTPC-CY
Marine electrics
TTYCS(LA)-4 or
TTYCS(LA)-1Q
Marine electrics
TTYCS(LA)-1Q
䋺
Securing location for crimped drain wires
(For use with TTYCSLA cables only)
LAN cable
DTI-C5E350 VCV
Clamping points for
TTYCS(LA)-4 cables
Clamping points for
TTYCS(LA)-1Q cables