1. INSTALLATION OF UNITS
1-8
To mount the FAP-6221/6222 in a panel, the optional flush mount kit OP64-4 (Code No.:
009-005-790) or OP64-5 (Code No.: 009-005-800) is required.
Contents of OP64-4
Name Type Code No. Qty
Panel OP64-4 009-006-370 1
O-ring 64-015-4524 009-006-180 1
Hex. nut M4 000-863-106 4
Flat washer M4 000-864-256 4
Spring washer M4 000-868-786 4
Contents of OP64-5
Name Type Code No. Qty
Fixing plate OP64-5 009-006-200 1
O-ring 64-015-4524 100-145-111 1
Hex. nut M4 000-863-106 4
Spring washer M4 000-864-256 4
Hex. bolt M4x35 000-868-786 4
FAP-6221/6222, flush mounting (OP64-4)
To Next Page
Loading...
