2. WIRING
2-11
Wrong connection 3
Multiple distributors cannot be connected.
Processor unit
Wrong connection 3
2.5 Connection of Instruments FI-30
The FI-30 series has various sensors, such as speed, depth, wind, etc. These sensors can
be connected to the NAVpilot-500/511 via the FI-30 server, and the NAVpilot-500/511 can
show data from them on its graphic display. To connect the NAVpilot-500 to the FI-30 server,
see the connection diagram shown below.
OUT A 1
OUT B 2
IN A 3
IN B 4
F.G.
1 +12V
2 0 V
3 OUTPUT A
4 OUTPUT B
10 INPUT A
11 INPUT B
+ -
NMEA
NMEA GPS
Processor unit
FAP-5002
FI-30 Server
NMEA IN/OUT
IN A 3
IN B 4
OUT A 3
OUT B 4
1 +12V
2 0 V
3 OUTPUT A
4 OUTPUT B
10 INPUT A
11 INPUT B
+ -
NMEA
NMEA GPS
Processor unit
FAP-5002
FI-30 Server
NMEA OUT
NMEA IN
Connection using the NMEA IN and NMEA OUT ports on FAP-5002
Connection using the NMEA IN/OUT ports on FAP-5002
TB7
TB5
TB6
To Next Page
Loading...
