Furuno NAVpilot-611 - Page 47

3. ADJUSTMENTS
3-19
3.5.4 WIND ANG (angle) (CALIBRATION)
Offset the wind angle. (For sailboat only)
1. Rotate the course control knob to select “WIND ANG” from the DATA CALIBRATION
menu.
2. Press the course control knob and the current value is circumscribed with a double
rectangle.
3. Rotate the course control knob to set offset (Setting range: -180.0 to +180.0º).
4. Press the course control knob to finish.
3.5.5 WIND SPEED (CALIBRATION)
Offset the wind speed. (For sailboat only.)
1. Rotate the course control knob to select “WIND SPEED” from the DATA CALIBRATION
menu.
2. Press the course control knob and the current value is circumscribed with a double
rectangle.
3. Rotate the course control knob to set offset (Setting range: -50 to +50%)
4. Press the course control knob to finish.