Function
(Opening Screen)
MENU 1
Press t
he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by button
Select the function
by button
Press t
he button
* When the direct call button is set,
the setup screen is also called by the
following method:
Channel 3 position "CH3"
Setup Item
RATE :Channel 3 position
1
(Position adjustment)
Use the (+) and (-) buttons to adjust the channel 3 position.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Channel 3 adjustment
Channel 3 position "CH3"
(3rd channel system)
The channel 3 servo position can be set from the transmitter. When CH3 is assigned to a
dial by the dial function (p.80), this setting is linked to that dial.
When CH3 is not assigned to a dial, it can be set with this screen.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen
Channel 3 position (POSI)
0~100%
Initial value: 100%
To Next Page
Loading...
