FUTABA 3PKS - Function Map; Menu Screen Operation

Pres
s
Pres
s
37
Function Map
(Function Set-up Screen)
Example of menu LEVEL2
Call the menu screen by
button up, down, left, or
right operation.
press the button to re-
turn to the Start Screen
Pres
s
(Opening Screen)
press the
button to re-
turn to the Start Screen
The screen on the right
shows an example of setting
EPA function.
On the menu screen, select
the function by moving the
cursor by
button up,
down, left, or right operation.
The highlighted item is the cur-
rently selected function.
Pres
s
Call the setup screen by
pressing the
button.
Switch MENU1 and MENU2 by
pressing the
button.
Menu Screen
The menu screen displays 18 items on 3 rows and 6 lines on one page and displays up to
36 items on 2 pages designated MENU1 and MENU2.
A menu screen matched to the purpose can also be created by using the menu customize
function described on page 38. The menu No. of the function indicated by the cursor is
displayed at the top right-hand
corner of the screen. When a
function is not assigned, OFF is
displayed at the top right-hand
corner of the screen.
Calling the setup screen
Menu No. of the function indicated
by the cursor is displayed.
When the cursor is in a position without
a function assigned, OFF is displayed.
The screen above is an example
of the LEVEL2 MENU1 menu.