EasyManua.ls Logo

FUTABA 3PKS - Reference; Warning Displays Overview; Low Battery and Backup Errors; Model Select Error Handling

FUTABA 3PKS
116 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
14
Reference
Warning Displays
Low Battery Alarm
If the transmitter battery voltage drops to 8.5V or less, an audible alarm will sound and
"LOW BATTERY" will be displayed on the LCD screen.
LCD screen: Audible alarm:
Continuous tone.
The vibrator:
Active (initial setting) page 104
Warning
When a low battery alarm is generated, cease operation immediately and retrieve the
model.
If the battery goes dead while in operation, you will lose control.
Backup Error
If the data is lost for an unknown reason, an audible alarm will sound and "BACK UP
ERROR" will be displayed on the LCD screen.
LCD screen: Audible alarm:
Tone will sound (9 times), then repeat.
Warning
When a backup error is generated, immediately stop using the system and request
repair from the Futaba Service Center.
If you continue to use the system, the transmitter may malfunction and cause loss of control
Model Select Error
If the power is turned back on in the state in which a model No. in the Data Pac was
called and the Data Pac is not installed, an audible alarm will sound and "SELECT ER-
ROR" will be displayed on the LCD screen. When any button is pressed, model No. 1
will be forcibly called.
LCD screen: Audible alarm:
Tone sounds (7 times) and stops (re-
peated)

Table of Contents

Related product manuals