12
Reference
DSC cord
When the T3PK transmitter and R113iP or R203HF receiver are connected with the DSC
cord, the servos can be operated without transmitting a signal. (DSC function)
Part name
DSC cord for T3PK
Connection
- When
used fully up to channel 3, the
Y-Adapter must be
purchased separately.
- Whe
n channel 3 is not used, connect the
receiver switch to CH3 and connect the
DSC cord to th
e B/C terminal.
DSC port
DSC cord
To servos
Receiver
Connected to B/C
Y-Adapter
To receiver battery
Receiver switch
To servos
To transmitter DSC jack
Connect to CH3
DSC cord
Receiver
Connected to B/C
To receiver battery
Receiver switch
To transmitter DSC jack
Cover
To Next Page
Loading...
