46
Function
(Opening Screen)
MENU 1
Press t
he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by button
Select the function
by button
Press t
he button
* When the direct call button is set,
the setup screen is also called by the
following method:
•Select the setting item by
button
*
blinks at the current
setup item.
End Point Adjuster "EPA"
Setting item (channel and direction)
ST-LFT :Steering (left side)
ST-RGT :Steering (right side)
TH-FWD :Throttle (foward side)
TH-BRK :Throttle (brake side)
3C-UP :3rd channel (up side)
3C-DWN :3rd channel (down side)
100%
Setting item (channel and
direction) selection
- Select by (JOG) button left or right
operation.
- The direction (ST-LFT and ST-RGT)
linked with the steering wheel is
switched.
- The direction (TH-FWD and TH-
BRK) linked with the throttle trigger
is switched.
(Preparation)
- Before setup the steering wheel steering angle, set the steer-
ing D/R dial (initial setup: DL1) to the maximum steering angle
position 100%.
- Select the setting item "ST-LFT" by (JOG) button up or down
operation and make the following adjustments:
1
Steering (left side) adjustment
Turn the steering wheel fully to the left and
use the (+) or (-) buttons to adjust the steering
angle.
2
Steering (right side) adjustment
Turn the steering wheel fully to the right and
use the (+) or (-) buttons to adjust the steering
angle.
3
When adjusting the steering angle of another channel imme-
diately after this, see the adjustment method for that channel.
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
Steering (EPA) adjustment
Adjust button
Adjust with the (+) and (-) but-
tons.
- Return to the initial value "100"
by pressing the (+) and (-) but-
tons simultaneously for about 1
second.
Steering EPA
ST-LFT :0~120
ST-RGT :0~120
Initial value :100
To Next Page
Loading...
