Revolution display
Governor
The battery voltage display is changed to engine
revolution display at starting the engine running,
and return to battery voltage display at the engine
stop automatically. The revolution mode can be
selected either main rotor revolution or engine
revolution. The rpm character starts slow blinking
at the governor starts the operation and fast blink-
ing at the revolution reached to +/- 2% of the set-
ting revolution. The rpm character changes to in-
verse character at the revolution within +/- 1% of
the setting revolution as the revolution is locked.
At the governor only mode, the revolution is dis-
played on the top of the display line after running
the engine.
Sub_Home screen
At the home screen display, the display of below
the line is scrolled to Battery voltage→Max.
revolution→Engine runtime→OLED display
mode→LED display mode→Operation mode by
pushing the mode + or - key.
1. Max. revolution
Governor
It memorizes the maximum engine revolution at the
operation. The display is changed to Max. revolution
by pushing the mode + key. The revolution data is
stored to the memory. The data is reset by pushing the
data + or – key for more than one second.
2. Engine runtime
Governor
It displays the engine runtime integration. The display
is changed to runtime mode by pushing mode + key
2 times from home screen. The display unit is second
until 100 hours as xxHxxMxx, over 100 hours, min-
utes as xxxxHxxM. The display is reset by pushing
data + or – key for more than 1 second.
3. OLED display mode [default: Saver]
It selects the OLED display mode. The Saver mode
reduces the brightness and saves the power consump-
tion after no editing for 60 seconds. The brightness is
returned by pushing any key. The Light mode always
lights the maximum brightness.
To Next Page
Loading...
