FXO H.323 Gateway User Manual Document Ver.: 118a
Release Sep, 2004
30
Destination H225 Call Signal Port – To configure the Call Signal port for
the destination unit. Support the GK mode only.
Allocate Port Range Start – To configure the beginning of the ports.
Allocate Port Range End – To configure the end of the ports.
Response Timeout – The call will be timed out if the call proceeding
message didn’t received from the remote side. Support the GK mode only.
Connection Timeout – The call will be timed out if the connect message
didn’t received from the remote side. Support the GK mode only.
H235 Security Token – Support the H235 security policy for the GK.
Support the GK mode only.
The port range is for the H245 TCP port. Please info your vendor if you
want to configure these ports for using.
To Next Page