FXO H.323 Gateway User Manual Document Ver.: 118a
Release Sep, 2004
37
one-stage-dialing function.
Auto connect time(FXO) – The FXO will send the connect message to the
IP side is this timer is up in the one-stage-dialing function. It could only
support the one-stage-dialing function.
FXO type – Users could configure all the calls need the 2
nd
stage dialing
or not.
Normal : The 1
st
or 2
nd
stage dialing will depend on the dialing plan
from the users. If user dial the number of the FXO port, that will be the
2
nd
stage dialing.
Force 2
nd
dial : Every calls will need the 2
nd
stage dialing type.
Hardware Type – This will show the hardware detection type. Support the
FXS/FXO model only.
To Next Page
Loading...