FXO GATEWAY - Page 72

FXO H.323 Gateway User Manual Document Ver.: 118a
Release Sep, 2004
70
-id PPPoE connection user name
-pwd PPPoE connection password
-reboot Reboot after remote host disconnection in PPPoE mode
(0=No Reboot, 1=Yes Reboot)
Note:
Range of ip address setting (0.0.0.0 ~ 255.255.255.255).
Example:
ifaddr -mode 0
ifaddr -ip 210.59.163.202 -mask 255.255.255.0 -gate 210.59.163.254
ifaddr -dns 1 168.92.1.1 -dns 2 168.95.1.2
ifaddr -http 80
ifaddr -sntp 1 210.59.163.254
ifaddr -ipsharing 1 210.59.163.254
ifaddr -ipchange 1
ifaddr -id 123456@hinet.net -pwd 123456 -reboot 1
usr/config$
Parameters Usage:
-print print current IP setting
-mode Define the network mode for this unit.
-ip assign IP address for Gateway
-mask assign internet subnet mask
-gate assign IP default gateway
-dns configure the IP address for the DNS server
usr/config$ ifaddr –dns 1 123.123.123.123
usr/config$ ifaddr –dns 2 123.123.123.125
-http Change the http port. User can change default HTTP port
(80) to another one for security or NAT application.
-sntp Configure the ip address for the timer server.
usr/config$ ifaddr -sntp 1 10.1.1.1
While 10.1.1.1 stands for SNTP server’s IP address.