G-Tek 27 Series User Manual

Page No. 8
UNPACKING AND INSPECTION OF RECORDER
➢ If the outer box shows sign of damage, it should be opened immediately, and the recorder
be examined.
➢ If there is evidence of damage, the instrument should not be operated, and the local
representative contacted for instructions. Ensure that all accessories and documentation
is removed from the box.
➢ Open the door of the recorder by rotating the knob Figure 1.
➢ Open the chart plate by opening the captive screw and inspect the recorder for
mechanical integrity. Close the chart plate and door. If the recorder is not for an
immediate use, re-pack the recorder in its original packing.
➢ If the recorder is for immediate use, you can start installing it now as per following
instructions.
➢ Please preserve the original packing along with all internal packing for future transport
requirements.
Figure 1 Front View of Recorder

G-Tek 27 Series Specifications

General

Brand	G-Tek
Model	27 Series
Category	Measuring Instruments
Language	English