Page No. 4
SPECIFICATIONS
5.1 USE
➢ This recorder is specially tailored to monitor the blood bank refrigerator temperature
data.
➢ This recorder also has an input for door open switch. The door opening and closing is very
frequent during the removal of the stored blood, it is easy to monitor how often and for
how much time the door was left open with this recorder.
➢ This recorder uses pressure sensitive chart paper so there is no need to replace the pen.
Since the pressure sensitive chart is used instead of thermal, the life of the recording is
high.
➢ Main’s failure and return is also logged. Recorder comes with built in battery backup to
ensure the proper working in case of power failure.
➢ The recorder comes with single channel, single pen for continuous marking of
temperature data and 3½ digit LCD display.
➢ This chart recorder also has 3 multipurpose keys which enables user to easy
programming/configure the unit.
5.2 FEATURES
➢ 6” Chart Width
➢ Inkless chart recorder
➢ LCD Display
➢ Real Time Clock
➢ Data Storage 64KB of memory
➢ Event Logging like Power Fail / Door Open / Power Restore
➢ storage of 14 days of data at 5 minute store interval
➢ USB port to communicate with PC
➢ BBR-Chart Application to download data
➢ Generate Reports from BBR-Chart
➢ Single Analog Input channel
➢ Direct Input standard PT-100 sensor
➢ Chart Speed of 7D/Rev
➢ Universal Power Supply 85-264 V AC, 47-63 Hz
➢ Battery Backup up to 72 hours
To Next Page
Loading...
Need help?
General
