Power and data transmission unit
Mounting und operating instructions
SECUREconnect 200
. | EE | Printed in Germany
EN
3. Technical description
3.1 Range of application
The SECUREconnect R and F components are designed for vertical
installation in the the frame and the door leaf, respectively.
It is not permitted to operate the unit in exterior gate or door assemblies
where ambient conditions require a higher protection class than IP .
SECUREconnect must not be used for purposes other than the intended
use.
'Intended use' comprises the observance of the manufacturer's operating
and service instructions which is essential for the avoidance of damage and
injury.
The companies GU and BKS exclude any liability for damage arising from
changes made on the lock or on the lock connection without their consent.
Suitable for installation in timber, PVC, and metal door assemblies with the
use of profile-specific screw-on type faceplates.
Short-circuit proof power transmission between door frame and leaf.
Encrypted data transmission.
All deliveries are made on the basis of the General Terms and Conditions
of the company GU.
3.1.1 SECUREconnect 200R for installation in the door frame
Power and data transmission unit for motor-driven or electromechanical
locking systems from GU and BKS.
Communication interface to the BKS-NET bus, output of lock status to
IO module (module IO or IO).
Status indicator LEDs.
Optional voltage supply of DC V or AC V
To Next Page
Loading...
