EasyManua.ls Logo

GALEB GP-100 - 4 Unpacking

GALEB GP-100
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Galeb GP-200 User Manual
Page 11
4. UNPACKING
After removing the device from cardboard boxes, follow the manual
and the
supporting
documents for the cash
register.
IMPORTANT
NOTES:
1) Do not place the device near strong sources of light
and
temperature!
2) Do not install the unit in humid and dusty
room!
3) Do not connect the device to a circuit of large
consumers (e.g. large refrigeration
units,
motors)
4) ECR set up so that the customer and the operator
at the same time have a
good
overview of the LCD
display.
5) Access to electronic components is possible only after
removing the seal service.
This
operation is allowed only
to authorize
dealers.
6) Only an authorized service technician can remove the
seal on the checkout register
for
repairs. Any removal of
the seal provided by the service intervention will be
considered
abuse, and as such is subject to
sanction.
7) It is recommended that every 6 months an authorized
servicer reviews cash
register.
Legal
obligation to
perform regular service every 12 months. After the 355-th
day of
fiscalization
or last technical inspection, the display
device will appear warning needs to be done technical
inspection, if the inspection is not done after 370-th day of
the warning will be printed
on
each 15 bill and when you
turn on the device, and as time goes on alert will
be
increasingly
common.
8) If the cash register is not used for a long time, it is
necessary to recharge the battery,
if
this
option is
taken.
9) ECR is activated in the power source 24 hours before
resuming
work.