5. SWITCH ON / OFF
The device GALEB GP-100, with addition of the external power
supply of 9V,
have
internal battery power. The device is operated by
pressing the MENU button when the
device
is off. Turn ON the ECR
followed proper greeting message and a
beep.
Switch OFF ECR can be arranged in two ways:
• It’s recommended to turn off device using software. In the
main menu (MENU 0)
by
pressing and holding the MENU
button for more than 3 seconds, the menu software
OFF
the
device. Selecting the option Yes the device is switched OFF with
an
accompanying
sound.
• Another method, the so-called forced shutdown, which is only
used if suitably
device
does
not turn off (fiscal memory error, or
when the battery is too empty, or other mistake devices), can be
made through
the
button C. When holding down the C of key,
more than 5 seconds, the device
is
automatically shut
down.
The cash register is equipped with an adapter, 220VAC + / - 22-33V /
50Hz. If it is
present
the
adapter provides power to cash register and
charges the
battery.
Before starting work, check that the paper is properly
loaded in the
device!
(display show date
and
time) :
- If the adapter is not plugged into the cash register, and not
use it for more
than
2,
5 or 10 minutes, depending on settings in
the 3.4, it
will
automatically turn
off.
Automatic turn off the cash register can only happen when cash
registers on
battery
power. When cash register is an external
power supply, it always stays
ON.
Also, this exclusion should be differentiated from the backlight
turns
off
automatically with operator display, which always
happens, no matter if the
device
is
in the internal or external
power supply. Turns the backlight on the device is
on
Menu
key.
To Next Page
Loading...