After the code is entered correctly, the ECR enters the mode of sale
(successful application
is
followed by three short beeps) and the
operator is still able to use the device until check-
out.
In the case of cancellation cashier (regardless of the mode-out) on the
cashier display
the
message:
If the value entered passwords do not match to a code of access to
the ECR, the screen
will
display a warning message: VALUE IS NOT
OK!
Each cashier has a level of access to device features. If the user tries to
use a function that does not allow it’s level, the message appears: YOU
DO NOT HAVE ACCESS
RIGHTS!
Example:
The example is based on a login from the cashier code 5555, and
logout, the same cashier.
In
the main menu cashier enters their
password, after which the ECR enters the mode of
sale:
Cashier logged off in a way that was previously defined in the sub-
menu out cashier. If
the
cashier
logged out using the keyboard device,
must then use the key sequence MENU,
C
cashier checked out, you will get a sign-off
on-screen message and then returns to the
main menu where the user login again need
for further w
ork.
NOTE: Login cashier may also be made from a PC using a protocol
function
device
s.
Bar - code reader: A device allows the user login using a bar code
reader on your
device.
For this function, it is necessary to implement
user codes in the form of a bar code
that
could be read by the reader
and the code has to be implemented with a minimum of 4 digits. The
device is on the Main menu.
9.6 Department reports
The following sub-menu is about depar
t
m
ent
s.
By entering in this sub-menu (button 2, then press 6, and confirm
with
TOTAL key), two options are available in this sub-men
u:
To Next Page
Loading...