information. You must also set the VIRB widget to be
shown in the widget loop (
Customizing the Widget
Loop,
page 29
).
1 Turn on your VIRB camera.
2 On your Forerunner device, select UP or DOWN
from the watch face to view the VIRB widget.
3 Wait while the device connects to your
VIRB camera.
When the camera is connected, a VIRB data
screen is automatically added to the activity apps.
4 During an activity, select UP or DOWN to view
the VIRB data screen.
5 Hold UP.
6 Select VIRB.
7 Select an option:
• To control the camera using the activity
timer, select Settings > Timer Start/Stop.
NOTE: Video recording automatically starts
and stops when you start and stop an activity.
• To control the camera using the menu
options, select Settings > Manual.
• To manually record video, select
Start Recording.
The video counter appears on the
Forerunner screen.
• To take a photo while recording video, select
DOWN.
• To manually stop recording video, select STOP.
• To take a photo, select Take Photo.
Device Information
Viewing Device Information
You can view device information, such as the unit
ID, software version, regulatory information, and
license agreement.
1 From the watch face, hold UP.
2 Select Settings > System > About.
Viewing E-label Regulatory and
Compliance Information
The label for this device is provided electronically. The e-
label may provide regulatory information, such as
identification numbers provided by the FCC or regional
compliance markings, as well as applicable product and
licensing information.
1 From the watch face. hold UP.
2 Select Settings > System > About.
Charging the Device
WARNING
This device contains a lithium-ion battery. See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
To Next Page
Loading...
