2-26 Pilot’s Guide 190-02488-01 Rev. B
Get Started
Direct Tuning
DATA ENTRY KEYS
FREQUENCY AUTOFILL
You may enter a standby frequency using the data
entry keys on the COM Standby control panel or by
pressing and turning the control knob.
Tapping STBY opens the control panel. From here you
may specify a frequency or select one using the
provided search options.
The current standby frequency value displays in the
direct tuning field.
Enter a new standby frequency
using the provided data entry
keys or by turning and pushing
the control knob.
To cancel the entry and exit the
control panel, tap Back.
Entering the new frequency value
places it in standby.
Numeric characters autofill the first valid frequency
value based on each selected digit.
Autofill characters are muted and display from the
cursor position to the right of the field.
Matching
Frequency
Selecting a digit that is not valid for the cursor location
results in no entry.
Invalid Selection
To Next Page
Loading...
Need help?
General
