190-02692-00 Rev. A
Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICES INDEX
427
APPENDIX A
Message Comments
VNV – Unavailable: Parallel course
selected.
A parallel course has been selected, causing the vertical deviation to go invalid.
VNV – Unavailable: Unsupported leg
type in flight plan.
The lateral flight plan contains a procedure turn, vector, or other unsupported leg
type prior to the active vertical waypoint. This prevents vertical guidance to the active
vertical waypoint.
WPT ARRIVAL – Arriving at waypoint
-[xxxx]
Arriving at waypoint [xxxx], where [xxxx] is the waypoint name.
XPDR1 FAIL – XPDR1 is inoperative. There is no communication with the #1 transponder.
XPDR1 SERVICE – XPDR1 needs
service. Return unit for repair.
The #1 transponder should be serviced when possible.
XTALK ERROR – A flight display
crosstalk error has occurred.
The MFD and PFDs are not communicating with each other. The G1000 system should
be serviced.
To Next Page
