Garmin GRS 77 - Page 48

Garmin G1000 Pilot’s Guide for the Piper PA-32 Saratoga
190-02692-00 Rev. A28
SYSTEM OVERVIEW
SYSTEM
OVERVIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO PANEL
& CNS
FLIGHT
MANAGEMENT
HAZARD
AVOIDANCE
AFCS
ADDITIONAL
FEATURES
APPENDICESINDEX
7) Press the ENT Key.
8) With ‘CREATE’ highlighted, press the ENT Key to create the profile.
Or:
Turn the large FMS Knob to select ‘CREATE & ACTIVATE’ and press the ENT Key to activate the new profile.
9) To cancel the process, select ‘CANCEL’ with the large FMS Knob and press the ENT Key.
Selecting an active profile:
1) Use the FMS Knob to select the AUX – SYSTEM SETUP Page.
2) Push the FMS Knob to activate the flashing cursor.
3) Turn the large FMS Knob to highlight the ACTIVE Field in the PILOT PROFILE Box.
4) Turn the small FMS Knob to display the pilot profile list and highlight the desired profile.
5) Press the ENT Key. The system loads and displays the system settings for the selected profile.
Renaming a profile:
1) Use the FMS Knob to select the AUX – SYSTEM SETUP Page.
2) Push the FMS Knob to activate the flashing cursor.
3) Turn the large FMS Knob to highlight ‘RENAME’ in the PILOT PROFILE Box.
4) Press the ENT Key.
5) In the RENAME PROFILE Window, turn the FMS Knob to select the profile to rename.
6) Press the ENT Key.
7) Use the FMS Knob to enter a new profile name up to 16 characters long and press the ENT Key.
8) With ‘RENAME’ highlighted, press the ENT Key.
9) To cancel the process, turn the large FMS Knob to select ‘CANCEL’ and press the ENT Key.
Deleting a profile:
1) Use the FMS Knob to select the AUX – SYSTEM SETUP Page.
2) Push the FMS Knob to activate the flashing cursor.
3) Turn the large FMS Knob to highlight ‘DELETE’ in the PILOT PROFILE Box.
4) Press the ENT Key.
5) In the DELETE PROFILE Window, turn the FMS Knob to select the profile to delete.
6) Press the ENT Key.
7) With ‘DELETE’ highlighted, press the ENT Key.
8) To cancel the process, turn the large FMS Knob to select ‘CANCEL’ and press the ENT Key.
If an SD card is inserted in the top slot of the MFD, pilot profiles may imported from the SD card to the
system, or exported from the system to the SD card.