9ENG8008 GFM436 User Manual
12 Storing Data
This instrument has a built-in, non-volatile, FLASH memory which allows the user to save gas concentration,
pressure, velocity and temperature readings at the time and date they are saved. The data is saved in a Comma
Separated Value (CSV) format.
With a brief set up, users can configure IDs for their readings to allow for multiple users, sites, or sample points to be
defined.
12.1 Storing Data
Once a reading has been taken, or while a reading is being taken, pressing the left soft key twice, will save the
most recently latched or current reading on the screen.
IMPORTANT: Unattended data logging is intended for gas concentration, AP and velocity or temperature
measurement. DP and SP may require different piping configurations depending on instrument setup
therefore they are not suitable for unattended data logging.
To Next Page
Loading...
